Duraflex® Type H-6 Pressure Tight Flexible Metal Hose

Duraflex® H-6 is an extremely flexible, convoluted, pressure tight metal hose which exhibits prolonged resistance to vibration, heat, and pressure

Features:
The Duraflex® H-6 innercore is formed from a specially annealed brass strip which features more than the usual number of convolutions per inch. The tubing is then compressed to place each helical convolution against the next, thus further increasing the flexibility. Additional protection is provided by a heavy braid of high tensile strength bronze wire which is non corrosive, heat, pressure and stress resistant.

Application:
Electrical Wiring Protection, Abrasion Resistance, Non-Sparking, and Electrical Continuity.

Construction:
Innercore -Brass; Braid - 1 Layer Bronze Fine Wire; Braid Weave - 1 over x 1 under

Fittings:
Customers may specify from a wide range of fittings to satisfy electromagnetic hermetic sealing, high temperature, self-locking, or other requirements. Typically, end fittings for industrial applications are made of brass; however, more severe operating environments may call for fittings constructed of other materials.